0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Civil Engineering Journal, , n. 3, v. 5
Seite(n): 624
DOI: 10.28991/cej-2019-03091274
Abstrakt:

Current research main aim is to study the effect of adding polypropylene fiber (PPF) on the behavior of expansive soil to reduce the swelling as percentage (0.5, 1 and 2%) of the weight of dry soil. Expansive soil used in this research was prepared artificially by mixing Ca-based bentonite from geological survey and mining company with sandy soil brought from Karbala city as percentage 80% bentonite to 20% sand of dry weight. Multiple laboratory tests have been carried are (Unconfined Compression Test, One-Dimensional Consolidation Test, Swelling Test, Sieve Analysis and Cycle Swell Shrink Test). A conventional odometer cell was modified to allow the study of swell- shrink cycle test to be carried out under controlled temperatures and surcharge pressure. The results showed that the increase in percentage of (PPF) led to decrease the swelling and to increase the unconfined compression strength. The wetting and drying results of (PPF) showed that with continuous cycles the effect of (PPF) keeps on reducing the swelling and the 2% of (PPF) produces less ratio of swell - shrink, which has obtained higher than 57 % in the improvement factor of swell and shrink.

Copyright: © 2019 Sarah Adnan Hussein, Haifaa Abd Al-Rasool Ali
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10340797
  • Veröffentlicht am:
    14.08.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine