Site characterisation of GeoNet stations for the New Zealand Strong Motion Database

The New Zealand Strong Motion Database provides a wealth of new strong motion data for engineering applications. In order to utilise these data in ground motion prediction, characterisation of key site parameters at each of the ~497 past and present GeoNet strong motion stations represented in the database is required. Here, we present the compilation of a complete set of site metadata for the New Zealand database, including four key parameters: i) NZS1170.5 site subsoil classification, ii) the time-averaged shear-wave velocity to a depth of 30 m (Vs30), iii) fundamental site period (Tsite) and iv) depth to a shear-wave velocity of 1000 m/s (Z1.0, a proxy for depth to bedrock). In addition, we have assigned a quality estimate (Quality 1 – 3) to each numerical parameter to provide a qualitative estimate of the uncertainty. New high-quality Tsite, Vs30 and Z1.0 estimates have been obtained from a variety of recent studies, and reconciled with available geological information.

This database will be used in efforts to guide development and testing of new and existing ground motion prediction models in New Zealand, allowing re-examination of the most important site parameters that control site response in a New Zealand setting. Preliminary analyses, using the newly compiled data, suggest that high quality site parameters can reduce uncertainty in ground motion prediction. Furthermore, the database can be used to identify suitable rock reference sites for seismological research, and as a guide to more detailed site-specific references in the literature. The database provides an additional resource for informing engineering design, however it is not suitable as a replacement for site-specific assessment.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.