Simplified Models to Capture the Effects of Restraints in Glass Balustrades under Quasi-Static Lateral Load or Soft-Body Impact
Autor(en): |
Emanuele Rizzi
Chiara Bedon Claudio Amadio |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 20 September 2022, n. 10, v. 12 |
Seite(n): | 1664 |
DOI: | 10.3390/buildings12101664 |
Abstrakt: |
Structural glass balustrades are usually composed of simple glass panels which are designed under various restraint solutions to minimize large out-of-plane deflections and prematurely high tensile/compressive stress peaks under lateral loads due to crowd. Linear supports, point-fixing systems, and others can be used to create geometrical schemes based on the repetition of simple modular units. Among others, linear restraints that are introduced at the base of glass panels are mechanically described in the form of ideal linear clamps for glass, in which the actual geometrical and mechanical details of real fixing components are reduced to rigid nodal boundaries. This means that, from a modelling point of view, strong simplifications are introduced for design. In real systems, however, these multiple components are used to ensure appropriate local flexibility and adequately minimize the risk of premature stress peaks in glass. The present study draws attention to one of these linear restraint solutions working as a clamp at the base of glass panels in bending. The accuracy and potential of simplified mechanical models in characterizing the effective translational and rotational stiffness contributions of its components are addressed, with the support of efficient and accurate Finite Element (FE) numerical models and experimental data from the literature for balustrades under double twin-tyre impact. Intrinsic limits are also emphasized based on parametric calculations in quasi-static and dynamic regimes. |
Copyright: | © 2022 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
6.78 MB
- Über diese
Datenseite - Reference-ID
10700257 - Veröffentlicht am:
11.12.2022 - Geändert am:
15.02.2023