The Shear Effect of Large-Diameter Piles under Different Lateral Loading Levels: The Transfer Matrix Method

In various analytical models, modeling the behavior of large-diameter monopiles and piles can be challenging due to these foundations with huge body sizes carrying mechanisms of lateral loads to the surrounding soils. In this paper, the transfer matrix method with the Timoshenko beam theory was used to modify the shear rotation of pile sections under different loading stages, including serviceability limit stages and the ultimate loading stage. In this transfer matrix method, a large-diameter pile is considered according to the Timoshenko beam theory, and the recurring variables in the matrix equation are replaced with constants to simplify the calculation steps. Two model test cases were used to verify the accuracy of the method. Then, a series of comparisons between the Timoshenko beam and the Euler–Bernoulli beam theories, with the relative pile–soil stiffness being equal to 0.15, 0.45, and 0.75, was conducted to investigate the differences in pile response after considering the shear deformation. The results show that the effect of shear deformation of large-diameter piles changes with different loading levels. The values of the pile deformation based on the Timoshenko beam theory divided by those of that based on the Euler–Bernoulli beam theory were in the range of 1.0 to 1.10, and they increased slightly with increasing loads, reaching their maximum value, and then rapidly decreased to 1.0 when close to the ultimate lateral load; the maximum value was influenced by the relative pile–soil stiffness. Furthermore, the ratio of the shear rotation of the pile section to the slope of the deflection curve was in the range of 1.0 to 1.10; these also showed similar but more moderate trends compared with the values of pile deformation based on the Timoshenko beam theory divided by those of that based on the Euler–Bernoulli beam theory.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.