0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Shaking Table Study on the Seismic Performance of Geogrid Reinforced Soil Retaining Walls

Autor(en): ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2021
Seite(n): 1-16
DOI: 10.1155/2021/6668713
Abstrakt:

This study presents experimental results from shaking table tests on a reduced-scale geogrid reinforced soil retaining wall (RSRW) to investigate the seismic response of the fundamental frequency, acceleration amplification, face displacement, backfill surface settlement, and reinforcement strain under different peak accelerations and durations. The fundamental frequency is in good agreement with the predicted values. The root mean square (RMS) acceleration amplification factors increase nonlinearly with the wall height and decrease with increasing seismic load, which is not regarded as a constant value. The distributions of the peak displacement are consistent with those of the residual displacement. The combination of the sliding and rotation is observed as the predominant mode of displacement, and the rotation mode is dominant. The positions near the face (35 cm) and the ends of the reinforcement (140 cm) demonstrated larger settlement than that of the central position (70 cm and 105 cm). The reinforcement strain increased with increasing peak acceleration and maximum values measured at the central layers. The trends of the potential failure surface are similar to those of the 0.3H bilinear failure surface. The friction coefficient is nonlinearly distributed along with the reinforcements, and the maximum friction coefficient appears at the top layer (F11).

Copyright: © Xiaoguang Cai et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10613212
  • Veröffentlicht am:
    09.07.2021
  • Geändert am:
    17.02.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine