0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Seismic Performance of the PVA Fiber Reinforced Concrete Prefabricated Hollow Circular Piers with Socket and Slot Connection

Autor(en):





Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 9, v. 12
Seite(n): 1339
DOI: 10.3390/buildings12091339
Abstrakt:

The seismic performance of prefabricated hollow circular piers with socket and slot connection was evaluated through model tests and numerical simulations. The quasi-static tests with cyclic lateral load and constant axial load were conducted on three large pier specimens. The piers of these three specimens were cast by polyvinyl alcohol (PVA) fiber concrete, and the piers were connected to the cover beams by slotted connections and to the bearing platform by socketed connections. The seismic performance of the specimens was investigated in terms of failure modes, hysteresis curves, skeleton curves, stiffness degradation, energy dissipation, and residual deformation. The test results showed that, within a certain range, increasing the axial compression ratio is able to enhance the shear bearing capacity of prefabricated hollow piers and increase the cumulative energy dissipation, but it is not beneficial to the ductility. In addition, the increase in the shear span ratio significantly reduces the shear bearing capacity of piers and increases the residual deformation of the specimen, but the ductility is significantly improved. In addition, the numerical model of the prefabricated hollow pier was established by ABAQUS. The result of the numerical simulation was consistent and similar to the experimental result in terms of damage modes and load–displacement curves. Finally, the parametric analysis of the prefabricated hollow piers was carried out on the basis of the numerical model.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

Bauwerkstypen

  • Über diese
    Datenseite
  • Reference-ID
    10692788
  • Veröffentlicht am:
    23.09.2022
  • Geändert am:
    10.11.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine