Seismic Performance Evaluation of RC Frame Designed Using Ethiopian and Chinese Seismic Codes

This study presents the seismic performance evaluation of the reinforced concrete (RC) frame designed as per Ethiopian (based on EN1998-1) and Chinese seismic codes to realize best practices within them. In the study, three-model RC frames with 4-, 8-, and 12-story are designed with the respective codes. Then, their seismic performances are evaluated using the nonlinear static (pushover) procedures of FEMA 356 and ATC 40 provisions. To validate the analysis result, dynamic nonlinear time history analysis is also made. The comparison parameters include elastic stiffness, peak strength, target displacement, and plastic hinge formation patterns in the structures. The results display many similarities in the global and local performances of the structures. Despite these, some noteworthy discrepancies are also noted. Besides, the performance point analysis revealed a significant difference in target displacement that reflects the two codes’ demand spectrum essential disagreements, particularly for the period of vibration greater than 2.0’s. In conclusion, the study highlighted the beneficial aspects of both codes, which will be useful for the future studies.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.