Seismic Fragility Assessment of Cable-Stayed Bridges Crossing Fault Rupture Zones

Current studies lack probabilistic evaluations on the performance of fault-crossing bridges. This paper conducts seismic fragility analyses to evaluate the fragility of cable-stayed bridges with the effects of fault ruptures. Synthetic across-fault ground motions are generated using existing simulation methods for the low-frequency pulses and high-frequency residuals. Incremental dynamic analysis is utilized to generate the seismic responses of the bridge. The optimal intensity measure (IM) for a cable-stayed bridge that crosses a fault is identified based on the coefficient of determination (R2). Root-mean-square velocity (Vrms) is found to be the best IM for cable-stayed bridges traversed by fault ruptures, instead of the commonly used ones such as peak ground acceleration or velocity (PGA or PGV). Fragility curves for the critical components of fault-crossing cable-stayed bridges, including pylons, cables, and bearings, are developed using the IM of Vrms, and are subsequently compared with those for the cable-stayed bridge near faults. Results show that the bearings on transition piers are the most vulnerable component for fault-crossing cable-stayed bridges because of the rotation of their girder. Compared to cable-stayed bridges near faults, pylons and bearings are more vulnerable in the transverse direction for cable-stayed bridges crossing faults, whereas the vulnerability of cables is comparable.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.