Seismic Design of Large-Span, Heavy-Load Transfer Truss for Zhanjiang Bay R&D Building

The Zhanjiang Bay Laboratory R&D Building project aims to create a favorable working, research, and living environment. Zone II of the Zhanjiang Bay Laboratory R&D Building is equipped with a large-span, heavy-load transfer truss to obtain a large space on the ground floor. The overall structure adopts a steel frame-core tube structure system. In order to reduce the deflection of the large-span, heavy-load transfer truss, eight diagonal pull rods are installed between the large-span, heavy-load transfer truss and the core tube. The Q235 cross-shaped replacement section can consume construction load energy. Adopting replacement methods can reduce the stress and damage of diagonal pull rods caused by construction loads. The structure adopts a performance-based seismic design method for seismic calculation and analysis. In addition, a special analysis was conducted on the single frame structure. The major results can be summarized as follows: during small earthquakes, all structural components are in the elastic stage; during large earthquakes, frame beams yield first, but frame columns and core tubes do not yield; even without considering out-of-plane constraints, the structure can still meet the requirements.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.