0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Seismic Behaviour of Rc Building Located in Erbil, Iraq and Strengthening by Using Steel Frame Sections Precast Bolt-Connected Steel-Plate Reinforced Concrete

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: IOP Conference Series: Earth and Environmental Science, , n. 1, v. 961
Seite(n): 012012
DOI: 10.1088/1755-1315/961/1/012012
Abstrakt:

This paper present outside strengthening with precast substructures, is a relatively new retrofitting approach that has recently attracted the attention of researchers. Outside strengthening with precast substructure, in contrast to member-level strengthening technologies (e.g., FRP strengthening, enlarging member section areas, and replacing rebars), is a structure-system reinforcement method that integrates the substructure and the original structure, improves overall seismic performance, and changes the deformation mode of the entire structure. The seismic capability of the exterior strengthening with precast bolt-connected steel-plate reinforced concrete is critically evaluated in this paper (PBSPC) Case studies are used to demonstrate the working principles, numerical methodologies, and design approaches. The simulation results were similar with prior studies, demonstrating that the numerical model was effective. The use of building steel representations reduces construction time, increases efficiency, and lowers costs. The goal of this technology is to lower the seismic displacement demand of nonductile. Current RC structures have steel frames connecting to the building floors. These frameworks run parallel to the structure of the building. Ganjan Life City, a building in Erbil, Iraq, is being used as a case study. The ISC 2017 and ASCE 7-10 earthquake codes were used to evaluate the building’s seismic performance before and after the reinforcement. The analysis’ findings suggest that the recommended technique is correct.

Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 3.0 (CC-BY 3.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10780719
  • Veröffentlicht am:
    12.05.2024
  • Geändert am:
    12.05.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine