Safety Standard for Special Class Damslopes Based on Reliability Analysis

The risk of slope failure is determined by the degree of damage caused by the slope slide. For the special-high slope of some high-risk water conservancy and hydropower projects, the standard should be appropriately raised. Thus, the safety standard for these slopes is explored on the basis of reliability analysis. The slopes with high risk of failure are divided into special class I and special class II slopes depending on the risk levels and acceptable risk standards. The concept of reliability theory-based relative ratio of the safety margin is utilized to establish the relationship between annual failure probability and safety factor, thereby obtaining the reasonable safety factors for different slopes. Results show that the values of safety factors for special class I and special class II are 1.40 and 1.35, respectively. These results can provide a reference for exploring the safety standards of dams with a height of more than 200 m.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.