RILEM Standard: testing methods for determination of the double-K criterion for crack propagation in concrete using wedge-splitting tests and three-point bending beam tests, recommendation of RILEM TC265-TDK

In this recommendation, standard testing methods for determination of the double-K criterion for Mode I crack propagation in concrete using wedge-splitting tests and three-point bending beam tests are specified for the fracture parameters of the initial cracking toughness K_icⁱⁿⁱ and the unstable fracture toughness K_Ic^un . Along with the recommendation of the standard testing methods, the theoretical background of the double-K criterion, the calculation methods and the results of round-robin testing for determining the double-K fracture parameters are presented in technical reports. The recommendation of the standard testing methods includes geometry for specimens, fabrication of specimens, testing machine, load transmission system and supports, measuring instruments, determination of initial cracking load P_ini, determination of measured maximum load P_max and initial compliance c_i, calculation methods for wedge-splitting test and three-point bending beam test, as well as the testing results and testing report forms. According to these methods, the measured fracture parameters of double-K criterion can be used to describe the onset of cracking, and the onset of unstable cracking or failure for predicting crack initiation, structure failure and crack stability in concrete structures.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.