Results of experimental tests of building samples
Autor(en): |
M. Yu Narkevich
O. S. Logunova P. I. Kalandarov R. T. Gazieva G. M. Aralov G. V. Tokmazov P. Yu Romanov S. Khushiev |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | IOP Conference Series: Earth and Environmental Science, 1 Dezember 2021, n. 1, v. 939 |
Seite(n): | 012031 |
DOI: | 10.1088/1755-1315/939/1/012031 |
Abstrakt: |
The purpose of the experimental study presented in the work is to generate new knowledge about the quality of concrete samples in a new information field that consolidates information about the results of full-scale tests and video streams that were obtained during active laboratory experiments-studies. When conducting experimental studies, the traditional technology of testing concrete samples for central compression was used. This was accompanied by continuous monitoring and the formation of a video stream for each sample. A distinctive feature of the study is the formation of an information field of experiments, which contains three levels: the level of initial data, the level of analysis of initial data and the level of generation of new knowledge. The level of analysis of the source data using the video stream allows you to obtain information at the end of the experiment that cannot be recorded in real time. For the samples under study, time intervals with different rates of defect development were obtained. The results obtained made it possible to identify new possibilities for the formation of the information field during traditional experimental studies of the quality of concrete images and, based on the information obtained, to identify patterns of development of surface continuity disorders in dynamics. New opportunities for the formation of the information field allow in real time to obtain and process information on the state of concrete and reinforced concrete structures of construction projects by quality indicators and, on the basis of the data obtained, predicting the risk of accidents, including at hazardous production facilities. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 3.0 (CC-BY 3.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
1.19 MB
- Über diese
Datenseite - Reference-ID
10780744 - Veröffentlicht am:
12.05.2024 - Geändert am:
12.05.2024