Restoration of Tilted Buildings via Micropile Underpinning: A Case Study of a Multistory Building Supported by a Raft Foundation

This paper presents a real case study of a micropiling process that was developed to stop the continuous tilting of a 9-story residential building in Dakahlia, Egypt. Shortly after the construction of the building, the surface raft foundation exhibited severe settlement problems. In order to carry out a geotechnical investigation, boreholes were drilled around the constructed building. It was discovered that in addition to a thick, soft clay layer in the soil profile, there was also a crucial eccentricity between the centroid of the total building loads and the centroid of the raft. The issue needed to be addressed immediately, and a micropiling system was proposed to satisfy the geotechnical and structural conditions associated with the case history. In addition to describing the field measurements, detailed methodology, and micropile installation process, this paper also presents three different design approaches for determining the number and location of the micropiles. Although the underpinning process itself initially induced some settlement, micropiling the raft proved to be an efficient solution to stop the continuous tilting of the building. A micropile load test confirmed the advantageous effect of the grouting technique used for Type B micropiles, where the grout is injected under high pressure.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.