Research on Vibration Suppression of Nonlinear Tuned Mass Damper System Based on Complex Variable Average Method

Tuned mass dampers (TMDs) are widely used as vibration damping devices in engineering practice. However, during use, TMDs inevitably exhibit some nonlinear characteristics that may negatively impact engineering applications. To improve the practical performance of TMDs, the cubic nonlinear stiffness of the TMD is considered, and a nonlinear design is implemented. A numerical model of a single-degree-of-freedom main structure controlled by an NTMD is developed, and the steady-state amplitude solution of the system is obtained using the complex variable averaging method. The results show that a jump phenomenon may occur in the structure. To address this, a multivalued solution discrimination formula based on the complex variable averaging method is proposed. The discriminant formula for the jump phenomenon obtains the frequency ratio and nonlinear coefficient curves of the critical jump state, and four different system response areas are obtained. This helps the structure avoid the jump phenomenon while ensuring stability of the main structure and improving the control performance of the NTMD.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.