Research on the Non-Planar Deformation Behavior of Reinforced Concrete Components Based on Size Effect

The section deformation distribution of reinforced concrete components is nonlinear due to the size effect. Existing analysis models such as the plastic hinge and the truss element are based on the plane cross-section assumption. The nonlinear deformation distribution of the section cannot be accurately simulated. Therefore, in this paper, non-planar strain distribution functions of sections are established. The law of the influence of geometrical characteristics and load characteristics on the nonlinear deformation distributions of the sections of the beam ends is analyzed. The quantitative method is established between the section size, position, and shear span ratio, and the nonlinear deformation distributions of sections. The finite element simulation and test results show that the non-planar strain distribution shape functions of sections given in this paper can accurately describe the axial strain distributions of different sections along the height and width of the sections. The non-planar deformation behaviors and mechanical properties of the components can be simulated. The interface connection accuracy is improved in the structural multiscale simulation.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.