Research on the Deformation Control Measures during the Construction Period of Super High-Rise Buildings with an Asymmetric Plan

Based on the Guangzhou Business Center project, a typical super high-rise building with an asymmetric plan, taking the construction speed, closure time of mega braces and belt trusses as influencing factors, a parametric analysis on its lateral and vertical deformations, as well as the maximum stress of key structural members was conducted. The analysis results indicated that the construction speed had a relatively small impact on the deformation and the maximum stress of key members. However, synchronous closure of belt truss compared with the delayed closure would result in smaller horizontal and vertical deformation differences, as well as the stress of belt truss. Meanwhile, the closure timing of the mega braces had little influence on the vertical deformation difference and the stress of belt truss. And the earlier the closure, the smaller the horizontal drift ratio, the greater the maximum stress of the mega braces. Further, deformation control measurements were brought forward. On the one hand, FEM simulation was carried out according to the above construction suggestions. On the other hand, real-time monitoring was also used. Finally, by comparing both results, proposed construction deformation control measures and simulation methods were verified.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.