Research on Frost Heaving Characteristics of Hydraulic Tunnels’ Wall Rock in Cold Regions Based on Phase Transition and Water-Heat-Stress Coupling

In order to study the problem of frost damage to wall rock caused by hydraulic tunnels’ phase transition between water and ice at low temperatures in cold regions, a three-field coupling governing equation considering temperature, seepage and stress was deduced. Taking a water conveyance tunnel in Xinjiang as the research object, a three-dimensional frost heaving finite element model was established based on the deduced coupling equations using finite element software. By numerically simulating the process of frost heaving, the spatial distribution and variation law of the frozen area and frost heaving force were obtained. The present study showed that the frozen area of wall rock at the tunnel entrance is spatially distributed in a long-necked funnel shape, and the frost depth of the section gradually decreases along the depth of the tunnel. Due to the hysteresis of heat conduction, the peak point of the maximum freezing depth of wall rock appears after the minimum ambient temperature. The circumferential distribution law of frost heaving force in wall rock remains consistent with the depth, that is, the maximum frost heaving tension occurs at the arch top and arch bottom and decreases to zero in the circumferential direction, and then it turns into the frost heaving pressure which gradually increases to the maximum at the arch waist. Along the depth, at 20 m away from the tunnel entrance, the frost heaving force at the arch top, arch waist and arch bottom is divided into a steep decline zone and a slow decline zone. After being frozen for 30 to 150 days, the growth rate of the absolute value of the maximum frost heaving force at the arch top and arch bottom is about 1.5 times that of the arch waist. The frost heaving force has greater influence on the arch top and arch bottom than on the arch waist.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.