Reliability analysis of a prestressed bridge beam designed in serviceability limit state as recommended by NBR 6118 and 7188

Nowadays it is known that it is important to study the safety of structures to avoid tragic accidents or economic losses. The most widely used method in the world to evaluate the safety of structures is structural reliability. The reliability index of prestressed precast beams of bridges designed using Brazilian standards (NBR6118 and NBR7188) is not known. This work evaluates the annual reliability indexes of a prestressed precast beam bridge at the serviceability limit state (SLS) projected using the Brazilian standard and compares it with results from the literature. The studied bridge has 33.5 meters of span, is simply supported, constituted by five precast concrete beams with U section. The reliability analysis was carried out using two methods for the four limit state equations: First Order Mean Value (FOMV) and First Order Reliability Method (FORM). Sensitivity analyzes were performed to consider both the relative contribution of these variables and the effect of their distributions on the annual reliability indexes for SLS. It was verified that the effect of load trains and the allowable stress significantly reduce the reliability index obtained for Brazilian standard. The service limit state equations are particularly sensitive to load trains, allowable stress and prestress losses, as well as their respective distributions.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.