0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Reconstructing Energy-Efficient Buildings after a Major Earthquake in Hatay, Türkiye

Autor(en):
ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 7, v. 14
Seite(n): 2043
DOI: 10.3390/buildings14072043
Abstrakt:

Türkiye’s earthquake zone, primarily located along the North Anatolian Fault, is one of the world’s most seismically active regions, frequently experiencing devastating earthquakes, such as the one in Hatay in 2023. Therefore, reconstructing energy-efficient buildings after major earthquakes enhances disaster resilience and promotes energy efficiency through retrofitting, renovation, or demolition and reconstruction. To this end, this study proposes implementing energy-efficient design solutions in dwelling units to minimize energy consumption in new buildings in Hatay, Southern Turkiye, an area affected by the 2023 earthquake. This research focused on a five-story residential building in the district of Kurtlusarımazı, incorporating small-scale Vertical-Axis Wind Turbines (VAWTs) with thin-film photovoltaic (PV) panels, along with the application of a green wall surrounding the building. ANSYS Fluent v.R2 Software was used for a numerical investigation of the small-scale IceWind turbine, and DesignBuilder Software v.6.1.0.006 was employed to simulate the baseline model and three energy-efficient design strategies. The results demonstrated that small-scale VAWTs, PV panels, and the application of a green wall reduced overall energy use by 8.5%, 18%, and 4.1%, respectively. When all strategies were combined, total energy consumption was reduced by up to 28.5%. The results of this study could guide designers in constructing innovative energy-efficient buildings following extensive demolition such as during the 2023 earthquake in Hatay, Türkiye.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10795786
  • Veröffentlicht am:
    01.09.2024
  • Geändert am:
    01.09.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine