0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

A Quantitative Evaluation Method Based on Back Analysis and the Double-Strength Reduction Optimization Method for Tunnel Stability

Autor(en): ORCID
ORCID
ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2021
Seite(n): 1-14
DOI: 10.1155/2021/8899685
Abstrakt:

Quantifying tunnel stability using the proposed combination of back analysis and the strength reduction method (SRM) is useful during construction. To feasibly and reliably obtain geotechnical parameters for the surrounding rock (which vary in different places), a real-coded genetic algorithm is used in setting the initial parameters of the neural network to improve the prediction accuracy of the parameters via back analysis by reasonably selecting the selection operator, crossover operator, and mutation operator. After obtaining the parameters, the proposed SRM, i.e., the optimization double-strength reduction method (ODSRM), which is based on the optimization method, is used to evaluate stability. By using this method, the cohesion and friction angle have different reduction factors that are more reasonable and accurate. The combined method is verified in an application to the Yu Liao Tunnel, where it is demonstrated that the combined method can use the measured displacements to obtain the safety factor. Compared with the traditional method, the proposed back analysis method can reduce errors in the predicted performance, and unlike the SRM, the ODSRM can avoid overestimating the safety factor with the same reduction factor. Finally, the presented methods can reduce the amount of calculation required and are convenient for evaluating tunnel stability with displacement.

Copyright: © 2021 Jinglai Sun et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10602121
  • Veröffentlicht am:
    17.04.2021
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine