0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Propriedades reológicas e hidratação de cimentos ternários contendo resíduos de mármore, porcelanato, bloco cerâmico e fosfogesso (Rheological properties and hydration of ternary cements containing clay brick, clay tile, marble, and phosphogypsum waste)

Autor(en): ORCID
ORCID
Medium: Fachartikel
Sprache(n): Portugiesisch
Veröffentlicht in: Ambiente Construído, , n. 4, v. 22
Seite(n): 59-75
DOI: 10.1590/s1678-86212022000400628
Abstrakt:

No research demonstrates the effect of combined waste raw materials as an alternative to natural sources in Limestone Calcined Clay Cement (LC3). In this context, this study aimed to evaluate the influence of the composition of ternary cements (TCs) containing industrial waste on their rheological and hydration properties. As raw materials, Portland cement and clay brick (CBW), clay tile (CTW), marble (MW), and phosphogypsum (PG) wastes were used. The rheological behaviour of the pastes was analysed by the mini-slump evolution over time and rotational rheometry. Hydration was evaluated by isothermal calorimetry and XRD/Rietveld. An increase in the specific surface area enhances the yield stress and plastic viscosity of the paste. CBW and CTW have pozzolanic reactivity, presenting an increase in the content of non-crystalline phases, including calcium silicate hydrate (C-S-H). The TCs reached at least 70% of the compressive strength of theHigh Early Strength Portland cement paste.The results suggest that CBW, CTW, MW and PG can be used as an alternative to reduce the clinker factor and decrease the environmental and economic impacts associated with extracting natural raw materials for cement production.

Copyright: © 2022 Ana Rita Damasceno Costa, Jardel Pereira Gonçalves
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10693176
  • Veröffentlicht am:
    23.09.2022
  • Geändert am:
    10.11.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine