Properties of High-Strength Concrete Incorporating Calcined Diatomaceous Earth, Polypropylene, and Glass Fibers

This study was aimed at determining the hardened and fresh properties as well as the high-temperature resistance of high-strength concrete (HSC) produced by incorporating diatomaceous earth, polypropylene, and glass fibers. CDE (calcined diatomaceous earth) was employed as a 10% cement replacement, while polypropylene and glass fibers were added separately to the mixtures at 0.2, 0.4, 0.6, 0.8, and 1.0% volumetric contents. Moreover, the mixtures without using CDE and fibers were used as references. The concrete mixtures were fabricated, followed by the determination of the fresh concrete flow, the absorption capacity, and the flexural, compressive, and splitting tensile strengths of hardened concrete. Furthermore, the specimens fabricated for the hardened concrete were exposed to temperatures of 400 °C, 500 °C, and 600 °C, and the remaining compressive strength was examined. The findings suggested that the incorporation of polypropylene and glass fibers in HSC with CDE enhanced the compressive, flexural, and splitting tensile strengths by 23.4 and 32.6%, 70.0 and 83.5%, and 18.9 and 17.9%, respectively. Moreover, the inclusion of polypropylene and glass fibers reduced the absorption of hardened concrete. Meanwhile, the inclusion of CDE lowered the strengths and increased the absorption. It was further identified that the incorporation of CDE enhanced the resistance of HSC to high temperatures, while polypropylene and glass fibers lowered the resistance. The incorporation of CDE, polypropylene, and glass fibers also lowered the flow of fresh concrete.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.