Production and Evaluation of Porous Photocatalyst Concrete Filter (deNOx PCF) for NOx Reduction

A porous photocatalyst concrete filter (deNOx PCF) is successfully manufactured to reduce NOx by mixing TiO2 photocatalyst with lightweight aerated concrete. From the results, 4% infusion rate of each foaming agent provided the smallest change of the height, and the optimal quality of the air bubbles can be produced by using foaming agent B with 4% of infusion rate. When 3% of TiO2 photocatalyst was mixed, less irregular and relatively homogeneous pores were formed on the surface with white color due to the proper amount of photocatalyst applied. For 3% of photocatalyst mixed with deNOx PCF, 1.03 μmol/hr of NO was reduced equivalent to 10.99% of NO reduction, suggesting that the TiO2 photocatalyst dispersed in the continuous and well-developed pores inside the specimen successfully performed the removal of NO flowing through deNOx PCF using synergistic effects of adsorption and photodegradation reaction. Finally, the specimen of porous deNOx PCF for reducing NOx developed in this study can be applied to various construction sites and the air quality can be solved by reducing NOx contributing to the formation of fine particles.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.