0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Prediction of Settling Velocity of Nonspherical Soil Particles Using Digital Image Processing

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2018
Seite(n): 1-8
DOI: 10.1155/2018/4647675
Abstrakt:

Digital image processing (DIP) is used to measure shape properties and settling velocity of soil particles. Particles with diameters of 1 to 10 mm are arbitrarily sampled for the test. The size of each particle is also measured by a Vernier caliper for comparison with the classification results using the shape classification table. The digital images were taken with a digital camera (Canon EOS 100d). Shape properties are calculated by image analysis software. Settling velocity of soil particles is calculated by displacement and time difference of images during settling. The fastest settling particles are spherical shaped. Shape factors well explain the difference of settling velocity by a particle shape. In particular, the aspect ratio has a high negative correlation with residual of settling velocity versus mean diameter. Especially, DIP has a higher applicability than classification using the shape classification table because it can measure a number of particles at once. The settling velocity of soil particles is expressed as a function of mean diameter and aspect ratio.

Copyright: © 2018 Donggeun Kim et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10236469
  • Veröffentlicht am:
    11.12.2018
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine