Piezoresistivity of Cement Matrix Composites Incorporating Multiwalled Carbon Nanotubes due to Moisture Variation

Cementitious composites usually work under moisture condition. Presently, the piezoresistivity of cementitious composites incorporating multiwalled carbon nanotubes (MWCNTs) due to moisture variation was experimentally investigated. The variation of moisture content was controlled by drying specimens in an oven. In most cases of moisture content, the composites were observed to present positive piezoresistivity during the process of cyclic compression. While moisture content was in a specific range, the composites exhibited negative piezoresistivity. The whole transition from positive piezoresistivity to negative piezoresistivity and then positive piezoresistivity was obtained with moisture variation. Moreover, the amplitude of piezoresistivity changed in the process. These phenomena may be explained through the combination of ionic conduction and electronic conduction. A theoretical model of piezoresistivity, able to predict the effects of porosity, the volume fraction of MWCNTs, and the connectivity parameters, is proposed. Numerical results with the model show that the calculated piezoresistive responses of specimens agree reasonably well with testing data.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.