0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Performance-based Optimal Design of Cantilever Retaining Walls

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Periodica Polytechnica Civil Engineering
DOI: 10.3311/ppci.13201
Abstrakt:

Modern buildings should provide some degree of safety against severe earthquakes. However, it is not economically feasible to construct buildings that withstand extreme loads without avoiding damage. In performance-based design, structural engineers and owners work together to achieve the best possible balance between construction cost and seismic performance. In this study, by employing a metaheuristic optimization, we have tried to extend the concept of performance-based design to retaining wall structures. According to the AASHTO LRFD Bridge Design Specifications, permanent displacement of retaining structures are tolerable, as long as the movement does not lead to unacceptable damage to the structure or facilities located in or near the moving earth. The decision on performance expectations needs to be made by owners with structural engineers providing a realistic assessment of the cost of designing to avoid the movement. To make this assessment possible, we developed a multi-objective optimization framework for simultaneous minimization of the construction cost and the permanent displacement of cantilever retaining walls. The effectiveness of the proposed framework was evaluated in the design of a typical cantilever retaining wall of 8 meters in height, once with both a toe and heel slab and once with either of them. The results indicated that obtaining the Pareto front of optimal solutions for these objectives, provides useful information that helps owners to select a solution that is the most economical in a trade-off between the construction cost and performance expectation.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.3311/ppci.13201.
  • Über diese
    Datenseite
  • Reference-ID
    10536482
  • Veröffentlicht am:
    01.01.2021
  • Geändert am:
    26.02.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine