Passive Control Measures of Wind Flow around Tall Buildings

The growth and diversification of tall buildings demands higher performance standards that encompass serviceability and resilience. In this respect, the control of air flow around tall buildings poses challenges to minimising the energy that could induce large vibrations or forces. The present investigation scrutinises the flow around a tall structure with variations on its surface roughness by adding balconies to the facade, as a form of passive control of the flow loads. This is conducted through flow simulations across optimised computational arrays that capture 3D effects. To illustrate the applicability of the proposed approach, two types of facades rotated 0∘, 90∘ and 180∘ are considered while focusing on pressure and vorticity fields. It was found that the presence of balconies produces zig-zag patterns on the face where they are located, whereas balconies on the front facade reduce drag with respect to the smooth case. Furthermore, buildings with balconies on their lateral faces experience some increase in drag force and the improvement of the aerodynamics around the lateral pedestrian zones. No qualitative variations between triangular and rectangular balconies were found, excepting some changes in pressure magnitude on the rear side induced by balconies placed on the front and rear facades. Through the comparison of results, it was confirmed that the findings align with previous studies undertaken for medium and low-rise buildings. This reinforces the proposal of using such passive control measures to improve the aerodynamic performance of tall buildings. The study enables the quantification of flow configurations and forces on the building’s faces. Some of the proposed passive control measures effectively mitigate pressure levels while causing large local disturbs on pressure and vorticity that should be attended to by designers of this type of facades.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.