Parametric Study of the Deep Excavation Performance of Underground Pumping Station Based on Numerical Method
Autor(en): |
Jiani Zhang
Zhenkun Yang Rafig Azzam |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 19 Juni 2024, n. 6, v. 14 |
Seite(n): | 1569 |
DOI: | 10.3390/buildings14061569 |
Abstrakt: |
Environmental responses to deep excavations are combined results of numerous factors. The effects of some factors are relatively straightforward and can be considered carefully during the design. On the other hand, more features impact excavation-induced performances indirectly, making their influences difficult to be clearly understood. Unfortunately, the complexity and non-repeatability of practical projects make it impossible to thoroughly understand these issues through realistic deep excavation projects. Therefore, parametric studies based on repeatable laboratory and numerical tests are desired to investigate these issues further. This work examines the influence of several key features on excavation-induced displacements through a series of 3D numerical tests. The study includes the choice of soil constitutive models, the modeling method of the soil–wall interface, and the influences of various key soil parameters. The comparison shows that the MCC model can yield a displacement field similar to the HSS model, while its soil movement is greatly improved compared to the MC model. Both the soil–wall interface properties and soil parameters impact the excavation-induced displacement to a large extent. In addition, the influence mechanisms of these parameters are analyzed, and practical suggestions are given. The findings of this paper are expected to provide practical references to the design and construction of future deep excavation projects. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
6.74 MB
- Über diese
Datenseite - Reference-ID
10788080 - Veröffentlicht am:
20.06.2024 - Geändert am:
20.06.2024