0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Optimizing Mixture Composition to Improve the Performance of Porous Asphalt for Wearing Course as an Environmentally Friendly Road Construction Material

Autor(en):



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Jurnal Teknik Sipil dan Perencanaan, , n. 1, v. 21
Seite(n): 20-27
DOI: 10.15294/jtsp.v21i1.17354
Abstrakt:

Porous asphalt is an alternative in flexible pavement which is considered to make water seep into the soil. In previous research have been tested the mixture of  porous asphalt that meets porous asphalt porosity requirements, but found the weaknesses that the stability is still lower than the standard required. Based on result obtained before, the study is aimed at investigating the use of mixture composition variable with different percentages until the optimal conditions were obtained, namely making a normal mixture, 15%, 18.75%, 22.5%, 26.25%, 30% as sand composition reduction. The percentage of sand reducted from previous composition with different asphalt variations. Tests are carried out using the Marshall method. Sequence of tests show that the materials used for experiment meet the requirement.  Optimum Asphalt Content obtained for the mixture are 6% of the total mixed weight. The best Marshall characteristics for AC-WC porous asphalt obtained are at the percentage of 26.25% sand reduction.  

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.15294/jtsp.v21i1.17354.
  • Über diese
    Datenseite
  • Reference-ID
    10411414
  • Veröffentlicht am:
    12.02.2020
  • Geändert am:
    12.02.2020
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine