The Optimization of Waterproof and Drainage Design and an Evaluation of the Structural Safety of Tunnels in Weak Watery Strata
Autor(en): |
Zelin Zhou
Xingyu Zhu Chuantian Zheng Zhiqiang Zhang Heng Zhang |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 10 Oktober 2023, n. 10, v. 13 |
Seite(n): | 2499 |
DOI: | 10.3390/buildings13102499 |
Abstrakt: |
The surrounding rock and high water pressure in weak watery strata have adverse effects on the mechanical properties of tunnel support structures. In order to optimize the anti-drainage design of tunnels in weak watery strata and evaluate their structural safety, this paper relies on the Taidacun Tunnel of the China–Laos Railway to carry out field monitoring research. A dual-field fluid–solid coupling calculation model is established to optimize the tunnel’s waterproof and drainage design, combined with a bending moment curvature model to evaluate structural safety. The main conclusions are as follows: Under the action of high water and soil pressure, the structural safety margin of the water-rich fine sand section of the Taidacun Tunnel is small, and waterproof and drainage design optimization is required. Combined with the proposed average pressure reduction coefficient, the influence of the water level and annular blind pipe spacing on the water pressure of the lining is proved, and then the optimal annular blind pipe spacing in the water-rich area of the tunnel is determined. A structural safety evaluation method based on the bending moment curvature model is proposed. Two models of elastic beam and moment–curvature beam are used to analyze the mechanical characteristics and optimization effects of the structure under optimal annular blind pipe spacing. |
Copyright: | © 2023 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
20.94 MB
- Über diese
Datenseite - Reference-ID
10744619 - Veröffentlicht am:
28.10.2023 - Geändert am:
07.02.2024