Optimization of Overcast Stripping Technology Parameters Based on Discrete Event System Simulation

In the process of open-pit mining, the system parameters determine the economic benefit and production efficiency of the mine. Conventional optimization involves building a system model for the process parameters. However, complex large-scale systems such as open-pit mining are difficult to model, resulting in a failure to obtain effective solutions. This paper describes a system simulation method for the process parameters involved in open-pit mining. The nature and interaction of each component of the system are analyzed in detail, and the logical flow of each layer of the system is determined. Taking the basic operational linkages of the equipment as the system drivers, we obtained the operational flow of dragline information. The barycentric circular projection method is used to simplify the control logic of the system, and a system storage state model is constructed to identify dynamic changes in the system and obtain the operation parameters of the dragline. A discrete event system is used for quantitative modeling, and the event step method is employed to advance the simulation process and obtain decision information. Finally, simulations are performed using various system parameters. The simulation results show that the maximum efficiency is achieved when the dragline height is ∼13 m, giving a capacity of 4276.52 m³/h. Error analysis indicates that the modeling error is minimized using a simulation correction coefficient of α = 0.94.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.