0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Optimization Analysis of an Energy-Saving Renovation Scheme for Building Envelopes of Existing Rural Houses Based on a Comprehensive Benefit Evaluation

Autor(en):



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 2, v. 14
Seite(n): 454
DOI: 10.3390/buildings14020454
Abstrakt:

In the cold regions of China, the existing rural houses are widely distributed and in large numbers. There are widespread problems such as low thermal performance of building envelopes, high building energy consumption, and poor indoor thermal environments. Reducing the energy consumption of building heating by reforming the envelope structure can reduce the environmental pollution caused by heating. In this paper, the existing rural houses in Tongchuan City, Shaanxi Province are taken as the research object, and EnergyPlus software is used to calculate building heating energy consumption, and the schemes are compared and selected via the entropy value method. Based on a comprehensive benefit evaluation, the best scheme for the renovation of building envelopes of rural houses in Tongchuan City is put forward. The research results show that the energy saving rate of buildings can reach more than 50% after renovation. In the evaluation of energy saving, incremental cost, return on investment, carbon emission reduction and unguaranteed hours, the weights are 0.1915, 0.2104, 0.2312, 1755, and 0.187, respectively. The best renovation scheme for rural housing is as follows: the thickness of the XPS board is 90 mm for exterior wall insulation; the thickness of the XPS board is 80 mm for roof insulation; the window-to-wall ratio of additional sunspace is 0.6; and the type of exterior windows is a broken-bridge hollow aluminum window of 6 + 12A + 6 (mm).

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10760164
  • Veröffentlicht am:
    15.03.2024
  • Geändert am:
    25.04.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine