Numerical Study on the Dynamic Response and Damage Cumulative of Bolt-Supported Cavern under Adjacent Cyclic Explosion

Adjacent cyclic explosions significantly impact the stability of underground anchored caverns. Based on the similar model test of the vault explosion of the anchored cavern, the dynamic analysis finite element software ANSYS/LSDYNA(18.0) was used to establish a model of the straight wall side explosion of the underground anchored cavern and conduct a numerical simulation. When the total amount of explosion load is the same, we compared the stress time history curve, displacement time history curve, tunnel wall displacement, and circumferential strain curve of the surrounding rock in the underground anchored cavern (under both a high-level single-side blast and a low-level cyclic side blast). We obtained the dynamic response rules of the surrounding rock. By comparing the damage evolution process of the surrounding rock in the two situations, the damage accumulation law of the surrounding rock was analyzed. At the same time, the axial stress distribution characteristics of underground anchor cavern anchors under the action of cyclic explosion were studied. The findings demonstrate that when the total level of blast load adjacent to the cavern is the same, the displacement and circumferential peak strain of surrounding rock and the axial stress of rock bolt in the high-level single explosion are greater than those in the low-level cyclic explosion. However, compared to a single explosion, the rock mass suffers more damage in the cyclic explosion. This study will provide engineers with information that will assist them with a better understanding of the cumulative damage mechanisms of surrounding rock, as well as the stress characteristics of rock bolts under dynamic loads near the explosion site, which will be used to design underground caves with anti-blast features.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.