0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Numerical Investigation on Stability of Lanxi’s Ancient City Wall during a Major Flood Propagation Process

Autor(en): ORCID






Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 9, v. 14
Seite(n): 2767
DOI: 10.3390/buildings14092767
Abstrakt:

Major flood propagation processes often cause instability and damage to the ancient waterfront city walls. To quantitatively reveal the impact of major floods on the stability of ancient city walls, this paper takes Lanxi’s ancient city wall as a study object and constructs a numerical model to investigate the influence of the major flood process in 2017 on the wall stability and reveals the varying laws of its seepage, displacements, maximal shear stresses and safety factors with flood propagation time on the basis of flood level data, combining indoor experiments and field observations. The results show that flood level variations significantly affect the PWPs (pore water pressures) of the fillings behind the wall. During the flood period, the maximal horizontal and vertical displacements are mainly induced by soil extrusion and deformation, and the maximal shear stresses of the outer and inner wall also significantly increase. The changing rates of the wall’s safety factors measurably exceed that of the flood level. The flood level variation range dramatically affects the safety factors when it changes near and above the wall foot. The minimum of the safety factors decreases with the increasing flood level falling rate when it drops near the wall foot at different rates. The ancient city wall usually does not experience serious instability under a single major flood. This study can provide a theoretical basis for the selection of reinforcement measures for flood control ancient city walls and the protection of ancient waterfront buildings.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10799799
  • Veröffentlicht am:
    23.09.2024
  • Geändert am:
    23.09.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine