Nonlinear analysis of the impact of openings on punching shear strength

Reinforced concrete flat slab projects usually require openings close to the columns for electrical and hydraulic installations. Since such openings reduce the punching shear of slabs, a comprehensive study is needed. In this paper, numerical models of slabs tested in literature were elaborated upon, using the commercial software in finite elements DIANA. The physical nonlinearity of the materials was considered. After the calibration and validation of the numerical parameters related to concrete and reinforcement, 62 numerical models were created for performing a parametric analysis. The numerical analysis aimed to study the effect of openings close to the columns and verify the punching resistance reduction. In this parametric study, the main variables were the compressive strength of the concrete, the bending reinforcement ratio, the number of openings, and the distance from the openings to the column's face. Finally, the numerical results obtained were compared with the punching strength values provided by the main structural design codes, viz., NBR 6118 (2014), Eurocode 2 (2004), ACI 318 (2019), fib Model Code (2010), and the next generation of Eurocode 2, which are constantly questioned in academic papers regarding their safety.