0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Monthly Attenuation Prediction for Asphalt Pavement Performance by Using GM (1, 1) Model

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2019
Seite(n): 1-11
DOI: 10.1155/2019/9274653
Abstrakt:

Due to the uncertainty and variability of various factors affecting the pavement performance, the change in pavement performance cannot be completely determined. In addition, this uncertainty is not accurately reflected by the pavement performance prediction model. In particular, the gray GM (1, 1) model is very suitable due to it is ability to better predict the existing situation of a domestic asphalt pavement along with the actual performance of a road surface of the “small sample, poor information” gray system. In this regard, the gray GM (1, 1) model is being increasingly used to forecast the performance of an asphalt pavement. When a gray GM (1, 1) model is used to predict the performance of an asphalt pavement, the condition number of the GM (1, 1) model matrix is too large, which, in turn, leads to the deviation of calculation and even wrong results in some cases. This study analyzed the reason for a large condition number of the GM (1, 1) model matrix. Combined with the numerical characteristics of the pavement condition index (PCI) and pavement quality index (PQI), this study focused on the annual, monthly, and daily attenuations of PCI and PQI to the condition number of the GM (1, 1) model matrix. Accordingly, we propose a method to forecast the performance of an asphalt pavement using the monthly attenuation of PCI and PQI. The PCI and PQI in Hunan Province in recent years have been predicted, and the findings reveal that the prediction GM (1, 1) model for the monthly attenuation of PCI and PQI not only effectively lowered the condition number of the matrix but also ensured that the relative error was small.

Copyright: © 2019 Limin Tang et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10314308
  • Veröffentlicht am:
    07.06.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine