Mix-design and Properties of Mortars from Alkali-activated Fly Ashes Containing High Amounts of Unburned Carbon Matter

Alkali-activated materials are a promising type of binder candidate as a substitute to Portland cement. Fly ashes can be used as binder precursors giving higher environmental benefits. In the present research, fly ashes (Type F) containing different amounts of unburned carbonaceous matter have been used to formulate mortars. Serious problems concerning the workability in the fresh state have been found when high carbon content are reached. An attempt to avoid the preliminary treatments used to eliminate the unburned matter is carried out by exploiting different mix-design receipts obtained by changing the water/binder ratio, the ratio of the alkaline activators and using different types of superplasticizer additives. Data so far collected underline that a high amount of unburned carbonaceous matter can not only compromise the mechanical properties of the materials, but also the rheological ones and underline the necessity to develop ad hoc additives for this type of binders.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.