0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Methods for Selecting Design Alternatives through Integrated Analysis of Energy Performance of Buildings and the Physiological Responses of Occupants

Autor(en):
ORCID



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 1, v. 14
Seite(n): 237
DOI: 10.3390/buildings14010237
Abstrakt:

We propose a technique that allows designers to develop energy-efficient buildings focused on occupants from the early design stage. The technique integrates the physiological responses of occupants and the energy performance of buildings. Among the architectural design elements, we considered the aspect ratio, ceiling height, and window-to-wall ratio as design variables and created 30 design alternatives for a single-occupancy room in a postpartum care center. These design alternatives were recreated in virtual reality, allowing 33 female participants to immerse themselves in the designed rooms. During the experiment, we collected electroencephalography (EEG) data from the participants. Furthermore, we used DesignBuilder to simulate 30 design alternatives and calculated the primary energy consumption per unit area for each alternative. By integrating the EEG data and energy performance analysis, we identified the design alternative among the 30 options that positively influenced the physiological responses of occupants while also being energy efficient. The selected alternative was designed with an aspect ratio of 1:1.6, a ceiling height of 2.3 m, and a window-to-wall ratio of 60%. This research represents a creative exploration that demonstrates how studies combining human physiological responses and architecture can evolve through integration with other subjects. Our findings provide a robust framework to explore the relationship between physiological responses and energy optimization for detailed architectural design elements.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10760118
  • Veröffentlicht am:
    23.03.2024
  • Geändert am:
    25.04.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine