0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Mechanical Properties of Post-Filling Coarse Aggregate Concrete under Biaxial Tension–Compression

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 1, v. 14
Seite(n): 203
DOI: 10.3390/buildings14010203
Abstrakt:

Post-filling coarse aggregate concrete (PFCC) is a new type of concrete that achieves energy-saving and emission-reduction goals through optimizing material proportions. The post-filled coarse aggregates can save the amount of cement material used, improve the strength and elastic modulus, prolong the service life of the material, and reduce expenses. We conducted a biaxial tension–compression test on PFCC cubic specimens, analyzed the strength and stress–strain curve regularity under different post-filling ratios (PFRs) and stress ratios, and proposed a new failure criterion suitable for PFCC. The results demonstrated that the tensile strength and compressive strength of each post-filling ratio concrete specimen under biaxial tension–compression action are lower than its uniaxial tensile and uniaxial compressive strength under the same post-filling ratio. Under the same stress ratio, the variation pattern of the post-filling ratio was the same as that under uniaxial stress, with the maximum value occurring at a PFR of 20%. The strength change rule was affected by both the stress ratio and the post-filling ratio. From the stress–strain curve, it can be seen that the presence of tensile stress significantly reduces the stiffness and ductility of PFCC under biaxial tensile and compressive loading. The strain corresponding to the peak strength of the σ3/fc-ε3 curve was much smaller than the peak strain under uniaxial compression. For example, at a stress ratio of (0.05:1), the strain ε3 in the compression direction was on average about 50% to 60% of the uniaxial compression strain under the same PFR. The stress–strain curve of PFCC under biaxial tensile and compressive loading was approximately linear throughout the loading process. A failure criterion for PFCC under biaxial tension–compression loading was established, and the calculated values agreed well with the test values. This paper provides references and research data for the study of PFCC under complex stress conditions.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10760399
  • Veröffentlicht am:
    23.03.2024
  • Geändert am:
    25.04.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine