0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Mechanical Properties of Coarse Aggregate Electric Arc Furnace Slag in Cement Concrete

Autor(en): ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Civil Engineering Journal, , n. 10, v. 7
Seite(n): 1716-1730
DOI: 10.28991/cej-2021-03091755
Abstrakt:

The feasibility of using EAF slag aggregate, fly ash, and silica fume in pavement Electric Arc Furnace Slag Concrete (CEAFS) is the focus of this research. EAF slag aggregate is volume stable and suitable for use in concrete, according to the findings of the testing. EAF slag was utilized to replace natural coarse aggregates in the CEAFS mixes. CEAFS was created by blending 50% crushed stone with 50% EAF slag in coarse aggregates, with fly ash (FA) and silica fume (SF) partially replacing cement at content levels (i.e. FA: 0, 20, 30, and 40%; SF: 0, 5, and 10%). The soil compaction approach was used to evaluate the optimal moisture level for CEAFS mixes containing EAF slag aggregate fly ash and silica fume. A testing program was used to investigate the weight of CEAFS units and their mechanical qualities (compressive strength, flexural strength, and elastic modulus). As a result, the fresh and hardened unit weights in the CEAFS are comparable. Moreover, variations in the concentration of mineral additives FA and SF in adhesives, as well as the CEAFS mixed aggregate ratio, have an impact on compressive strength, flexural strength, and elastic modulus at all ages. However, combining EAF slag aggregate with (FA0% +SF10%; FA10% +SF0%; FA10% +SF10%; and FA20% +SF10%) the CEAFS mixtures have improved mechanical characteristics over time. According to this study, CEAFS pavements can be made with EAF slag aggregate fly ash and silica fume. In addition, a formula correlation was suggested to compute CEAFS (i.e. compressive strength with elastic modulus and compressive strength with flexural strength). 

Copyright: © 2021 Huu-Bang Tran,
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10641240
  • Veröffentlicht am:
    29.11.2021
  • Geändert am:
    02.12.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine