Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

The preparation of cement-based supplementary cementitious materials is an important method for the efficient use of iron tailings and the reduction in CO2 emissions. The aim of this study is to improve the reactivity of iron tailings by mixing them with steel slag, slag, and fly ash through orthogonal tests to solve the problem that iron tailings cannot be utilised on a large scale. The compressive strength, hydration products, and microstructure of the iron tailings–cement-based supplementary cementitious materials were investigated using ICP-OES, XRD, TG, FTIR, and SEM. The results revealed that each solid waste raw material played a distinct role in the hydration reaction. In the iron tailings–cement-based supplementary cementitious materials system, steel slag provided Ca2+, OH−, and Si4+ ions, slag provided Ca2+ and Al3+ ions, fly ash contributed a significant amount of Ca2+ and Al3+ ions, and iron tailings offered more nucleation sites and some Si4+ ions for the hydration products. Moreover, there was a synergistic effect among these four materials, promoting the formation of hydration products such as ettringite, C-(A)-S-H gels, and others. When the proportion of IOTs:SS:FA:SL was 9:8:8:2, the highest 7 d compressive strength of cementitious material was 24.8 MPa. When the proportion of IOTs:SS:FA:SL was 9:6:8:4, the highest 28 d compressive strength of cementitious material was 35.0 MPa. This study provides a comprehensive solution for the utilisation of iron tailings and contributes to the high-value green utilisation of solid waste.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.