Mechanical Performance Analysis and Parametric Study of a Self-Anchored Suspension Bridge with Ultra-Wide Double-Sided Steel Box Girder

A sufficient understanding of mechanical performance of self-anchored suspension bridge with double-sided steel box girder is essential for design and normal use as such bridges are widely built in urban bridge. Using the Yunlongwan Bridge which is a suspension bridge with ultra-wide double-sided steel box girder as an example, this paper investigates its deformation and mechanical performance under vehicle load. Firstly, based on the field test results, the deformation performance of the bridge and the stress distribution of the main girder are analysed, with emphasis on the shear lag effect of double-sided steel box girder. Then, a multiscale model of the bridge was built, and the accuracy of the model was verified by comparison with the test data. Finally, the influence of design parameters on the mechanical behaviour of double-sided steel box girder is studied by numerical simulation. The results show that the deformation of the bridge has good symmetry, there is obvious shear lag effect on the main girder, and the U-rib thickness, diaphragm spacing, and vehicle load could significantly affect the stress of the main girder top plate. The obtained analytical results lead to a better understanding of the mechanical performance and provide reference for the design of self-anchored suspension bridge with double-sided steel box girder.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.