Mechanical Characteristics and Acoustic Emission Characteristics of Mortar-Rock Binary Medium

The stability of the interface between mortar and rock is very important in engineering construction. In this paper, the all-digital acoustic emission (AE) system is used to detect the direct shear test of the mortar-rock binary medium interface with different sawtooth angles under different normal stress states. The stress-displacement information and AE signal during the whole shearing process are extracted. The coupling relationship between stress and AE characteristic parameters is discussed. The quantitative relationship between sawtooth angle and shear strength of binary medium is established, and three AE characteristic parameters that can be used to predict structural instability are proposed. The research shows that: With the increase of the normal stress and the sawtooth angle, the shear strength of the mortar-rock binary medium increases. The relationship of that is obtained by least squares fitting. The shear stress-displacement curve is divided into five stages according to the change of deformation law. Through the analysis of AE characteristic parameters, it is found that increasing the sawtooth angle makes the AE count and AE cumulative count increase. Based on the analysis of the characteristic parameters of RA-AF, the changes of shear cracks and tensile cracks within the whole shearing process were obtained, respectively. In the process of binary medium shearing, the AE peak frequency is in the range of 120–340 kHz. Three acoustic emission parameters that can predict the macroscopic damage of binary media are obtained: the AE b value, the ratio of shear crack signals, and the number of signals with a peak frequency of 220 Hz to 320 Hz.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.