Masonry Dome Behavior under Gravity Loads Based on the Support Condition by Considering Variable Curves and Thicknesses

It is necessary to recognize masonry domes’ behavior under gravity loads in order to strengthen, restore, and conserve them. The neutral hoop plays a crucial role in identifying the masonry dome’s behavior to distinguish between its tensile and compressive regions. When it comes to determining the neutral hoop position in a dome with the same brick material, in addition to determining the dome’s curve and thickness, the support condition located on the boundary line is a significant parameter that has received less attention in the past. Therefore, this research aims to comprehensively define masonry dome behaviors based on the support condition’s effect on the masonry dome’s behavior, in addition to thickness and curve parameters, by determining neutral hoop(s). The method is a graphical and numerical analysis to define the sign-changing positioning in the first principal stress (hoop stress), based on the shell theory and extracted from a finite element method (FEM) Karamba3D analysis of a macro-model. The case studies are in four types of supports: condition fixed, free in the X- and Y-axes, free in all axes (domes placed on a drum), and free in all axes (domes placed on a pendentive and a drum). For each support condition, twelve curves and four varied thicknesses for each curve are considered. Results based on the dome’s variables show that, in general, four types of masonry domes behavior can be identified: single-masonry dome behavior with no neutral hoop; double-masonry dome behavior where all hoops are compressive with a single neutral hoop; double-masonry dome behavior where hoops are compressive and tensile with a single neutral hoop; and treble-masonry dome behavior with double neutral hoops.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.