Lotus-Leaf-Inspired Biomimetic Coatings: Different Types, Key Properties, and Applications in Infrastructures

A universal infrastructural issue is wetting of surfaces; millions of dollars are invested annually for rehabilitation and maintenance of infrastructures including roadways and buildings to fix the damages caused by moisture and frost. The biomimicry of the lotus leaf can provide superhydrophobic surfaces that can repel water droplets, thus reducing the penetration of moisture, which is linked with many deterioration mechanisms in infrastructures, such as steel corrosion, sulfate attack, alkali-aggregate reactions, and freezing and thawing. In cold-region countries, the extent of frost damage due to freezing of moisture in many components of infrastructures will be decreased significantly if water penetration can be minimized. Consequently, it will greatly reduce the maintenance and rehabilitation costs of infrastructures. The present study was conducted to explore any attempted biomimicry of the lotus leaf to produce biomimetic coatings. It focuses on anti-wetting characteristics (e.g., superhydrophobicity, sliding angle, contact angle), self-cleaning capability, durability, and some special properties (e.g., light absorbance and transmission, anti-icing capacity, anti-fouling ability) of lotus-leaf-inspired biomimetic coatings. This study also highlights the potential applications of such coatings, particularly in infrastructures. The most abundant research across coating materials showed superhydrophobicity as being well-tested while self-cleaning capacity and durability remain among the properties that require further research with existing promise. In addition, the special properties of many coating materials should be validated before practical applications.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.