0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Local Deformation Analysis and Optimization of Steel Box Girder during Incremental Launching

Autor(en):




Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 7, v. 14
Seite(n): 2241
DOI: 10.3390/buildings14072241
Abstrakt:

Due to the significant weight of the steel box girder and the substantial gap between temporary piers, the stress concentration and localized deformation of the girder’s bottom plate are pronounced during the incremental launching construction process. In this study, the multi-scale finite element method was employed to simulate the incremental launching process of the steel box girder, analyze the pattern of localized deformation in the bottom plate contact area, and propose corresponding optimization control measures. Additionally, the entire incremental launching process was monitored, and the improvement in localized deformation before and after the optimization of the incremental launching scheme was analyzed. The results illustrate that the original incremental launching scheme led to substantial localized deformation in the bottom plate contact area of the steel box girder. Optimal control measures were implemented for the four incremental launching construction schemes. The optimal scheme significantly mitigated the localized deformation of the steel box girder’s bottom plate, with an average decrease in deformation of 48.32%. These findings can provide robust technical guidance and data support for the control of localized deformation in large-span steel box girders during the incremental launching construction process.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10795300
  • Veröffentlicht am:
    01.09.2024
  • Geändert am:
    25.01.2025
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine