0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

LNMR Study on Microstructure Characteristics and Pore Size Distribution of High-Rank Coals with Different Bedding

Autor(en): ORCID
ORCID
ORCID
ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2021
Seite(n): 1-8
DOI: 10.1155/2021/8542630
Abstrakt:

In order to study the pore structure characteristics of high-rank coals with different bedding, NMR experiments were carried out for high-rank coals with different bedding angles (0°, 30°, 45°, 60°, and 90°). The results show that the distribution of T2 map of high-rank coal with different bedding is similar to some extent, showing a double peak or triple peak distribution, and the first peak accounts for more than 97% of the total, indicating that small holes are developed in high-rank coal with different bedding, while macropores are not developed. The influence of bedding angle on the fracture proportion is less than 0.3%. Compared with the fracture proportion, the effect of bedding angle on the proportion of microhole, medium hole, and large hole is greater and presents a certain rule. There are certain differences in T2 cutoff value (T2C) of high-rank coal with different bedding. The relationship between bedding angle and T2C conforms to exponential function, and the correlation degree R2 is 0.839. The research results provide a theoretical basis for gas extraction and utilization and prevention of gas disaster in coal mines in China.

Copyright: © Jiajia Liu et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10638206
  • Veröffentlicht am:
    30.11.2021
  • Geändert am:
    17.02.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine