Lever-Type Tuned Mass Damper for Alleviating Dynamic Responses

This study considers the structural vibration control by a lever-type tuned mass damper (LTMD). The LTMD has a constraint condition to restrict the motion at both ends of the lever. The LTMD controls the dynamic responses at two locations combining the tuned mass damper (TMD) and the constraint condition. The parameters of the LTMD are firstly estimated from the TMD parameters and should be modified by them to obtain from numerical results. The effectiveness of the LTMD is illustrated in two numerical experiments, and the sensitivity of the parameters is numerically investigated. It is shown that the LTMD leads to the remarkable displacement reduction and exhibits more definite control than the TMD system because the LTMD controls the vibration responses at two DOFs. More displacement responses are reduced when the installation locations of the LTMD coincide with the nodes to represent the largest modes’ values at the first and second modes. The application of the LTMD at the dynamic system of a few degrees of freedom (DOFs) is more effective than the system of many DOFs.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.