Leakage Diagnosis of Air Conditioning Water System Networks Based on an Improved BP Neural Network Algorithm

Compared with traditional pipe networks, the complexity of air conditioning water systems (ACWSs) and the alternation of cooling and heating are more likely to cause pipe network leakage. Pipe leakage failure seriously affects the reliability of the air conditioning system, and can cause energy waste or reduce human comfort. In this study, a two-stage leakage fault diagnosis (LFD) method based on an Adam optimization BP neural network algorithm, which locates leakage faults based on the change values of monitoring data from flow meters and pressure sensors in air conditioning water systems, is proposed. In the proposed LFD method, firstly, the ACWS network’s hydraulic model is built on the Dymola platform. At the same time, a cuckoo algorithm is used to identify the pipe network’s characteristics to modify the model, and the experimental results show that the relative error between the model-simulated value and the actual values is no more than 1.5%. Secondly, all possible leakage conditions in the network are simulated by the model, and the dataset is formed according to the change rate of the observed data, and is then used to train the LFD model. The proposed LFD method is verified in a practical project, where the average accuracy of the first_stage LFD model in locating the leaking pipe is 86.96%; The average R2 of the second-stage LFD model is 0.9028, and the average error between the predicted location and its exact location with the second-stage LFD model is 6.3% of the total length of the leaking pipe. The results show that the proposed method provides a feasible and convenient solution for timely and accurate detection of pipe network leakage faults in air conditioning water systems.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.